Category |
Pillow Block |
Inventory |
30.0 |
Minimum Buy Quantity |
N/A |
Weight |
23 lb |
Product Group |
M06288 |
Number of Mounting Holes |
2 |
Mounting Method |
Concentric Collar |
Housing Style |
2 Bolt Pillow Block |
Rolling Element |
Tapered Roller Bearing |
Housing Material |
Cast Iron |
Expansion / Non-expansion |
Non-expansion |
Mounting Bolts |
5/8 Inch |
Relubricatable |
Yes |
Seals |
Double Lip Radial |
Housing Configuration |
1 Piece Solid |
Inch - Metric |
Inch |
Other Features |
Double Row | Wide Inner Race | With Set Screw |
Long Description |
2 Bolt Pillow Block; 2-7/16" Bore; 2-3/4" Base to Center Height; Concentric Collar Mount; Tapered Roller Bearing; 8-3/8" Minimum Bolt Spacing; 8-5/8" Bolt Spacing Maximum; Relubric |
UNSPSC |
31171511 |
Harmonized Tariff Code |
8483.20.40.80 |
Noun |
Bearing |
Keyword String |
Pillow Block |
Manufacturer Item Number |
E-P2B-TRB-2 7/16 |
Weight / LBS |
23 |
Bolt Spacing Minimum |
8.375 Inch | 212.725Millimeter |
B |
2.75 Inch | 69.85 Millimeter |
Actual Bolt Center to Center |
0 Inch | 0Millimeter |
d |
2.438 Inch | 61.925 Millimeter |
Nominal Bolt Center to Center |
8.5 Inch | 215.5 Millimeter |
Bolt Spacing Maximum |
8.625 Inch | 219.075Millimeter |
D |
4 Inch | 101.6 Millimeter |
Shaft Size |
2.4375 in |
Shaft Size Type |
Imperial |
UPC Code |
053893593920 |
Dimension B |
4 in |
Dimension L |
10-1/2 in |
Dimension A |
2-7/8 in |
Dimension J Min. |
8-3/8 in |
Dimension J Max. |
8-5/8 in |
Bolt Diameter |
5/8 in |
Dimension N |
3/4 in |
Dimension N1 |
7/8 in |
Dimension H1 |
1-5/8 in |
Dimension H2 |
5-23/32 in |
Dimension d1 |
4-1/16 in |
Dimension H |
2-3/4 in |
e |
0.40 |
X (if Fa/Fr ≤ e) |
0.87 |
Y (if Fa/Fr ≤ e) |
2.17 |
X (if Fa/Fr > e) |
0.7 |
Y (if Fa/Fr > e) |
2.63 |
K Factor |
1.51 |
C90 Dynamic Load Rating1 |
11600 lb |
C0 Static Load Rating |
54000 lb |
Fa-max Maximum Permissible Thrust Load2 |
3454 lb |
Fr-max Maximum Allowable Slip Fit Radial Load3 |
9500 lb |
Max. Speed4 |
2420 rpm |
Note |
Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur |